Compatibility
Know What Fits Before You Install It.
A considered fit starts with the complete connection. Match the AuTanium™ system, the component specifications, and the intended application.
The designation
AuTanium™ Compatible.
AuTanium™ Compatible
The designation identifies components intended to work together within the corresponding AuTanium™ specifications.
It is a system identifier. The relevant product information still needs to confirm the pairing: jewelry form, post gauge, wearable length, and threaded interface. A familiar shape or matching gauge alone does not establish a compatible connection.
The designation does not mean every AuTanium™ component fits every other component, and it does not establish compatibility with another brand.
Before installation
Four Details to Confirm.
01 · System & connection
Identify the top and the receiving component. Confirm that their product documentation specifies the same AuTanium™ interface. Check the full thread specification when selecting a replacement.
02 · Gauge
Read the outside diameter of the post that passes through the piercing. Gauge describes that diameter; it is separate from the diameter of the internal threaded connection.
03 · Wearable length
Confirm the usable post or bar length and how it is measured. Decorative tops, back discs, and overall jewelry length are separate measurements.
04 · Application & fit
Match the jewelry form, end dimensions, and complete assembled fit to the intended placement. A professional piercer should assess anatomy and initial-piercing suitability.
Know the mechanism
Threaded and Threadless Are Different.
| Pairing | What to verify |
|---|---|
| AuTanium™ top + AuTanium™ receiver | Use the documented pairing for the exact product configuration. Check that the end seats as specified. |
| Same gauge + a different brand | Gauge does not identify thread diameter, pitch, engagement, or shoulder geometry. Do not assume a fit. |
| Threadless pin + threaded receiver | These use different retention mechanisms. A press-fit pin is not a replacement for a specified threaded end. |
| An end that starts but does not seat | Stop. Starting a turn does not prove compatibility. Ask the supplier to confirm the component references. |
If the connection resists, sits unevenly, or leaves an unexpected gap, stop and confirm the parts. Never force a fit.
Help with an existing piece
Make the Pairing Easy to Identify.
For a fit question, include the brand and product reference for each component, the post gauge and length, and clear photographs of the detached top and receiving end. If a batch or order reference is available, include it as well.
For a new piercing or a change to an unfamiliar jewelry system, visit a professional piercing studio for selection and fitting.
Compatibility questions
A Few Useful Answers.
Does the same gauge mean the same thread size?
No. Gauge describes the outside diameter of the post. Thread dimensions describe the mating connection inside the system. Both must be checked independently.
Can I use any threaded top with an AuTanium™ post?
Only use a top documented as compatible with that AuTanium™ configuration. A similar-looking thread is not sufficient evidence.
Can a single top be used with more than one gauge?
Only where the corresponding component specifications explicitly permit it. Do not infer cross-gauge compatibility from the platform name.
Where are the detailed dimensions?
Start with the Technical Specifications page. Product-specific drawings and interface details should be requested for the exact component before ordering or manufacturing.